The VNM EC 200 60-1516-01 is a compact, dedicated enterprise controller for VN‑Matrix® systems. It simplifies management of large VN‑Matrix deployments, efficiently configuring, managing, and dynamically controlling large VN‑Matrix systems from a single user interface. Every VN‑Matrix system includes a basic embedded Web browser interface for the configuration of encoders and decoders. This embedded interface is useful in small systems limited to a few units or systems that will be left in a fixed operational state. The VNM EC 200 provides greater processing capacity for efficient management, configuration, and dynamic control over large VN‑Matrix systems. Its embedded web interface quickly organizes and sorts all devices in a system based on properties such as: unit status or type, operating mode, source, controller, or firmware version. Multiple VNM EC 200 controllers can be deployed in VN‑Matrix systems, providing control over the entire system or independent clusters of VN‑Matrix devices. The VNM EC 200 can also create streaming and recording system presets that can be recalled directly from an external control system. Each preset captures all device settings and defines specific streaming connection and recording actions. The ability to recall streaming and recording presets greatly simplifies management and control of VN‑Matrix systems. Two VNM EC 200 units can be configured to operate together as a redundant system for mission-critical applications, with one configured as a primary unit, and the other as a secondary unit. System data is continuously synchronized between the redundant pair. The secondary unit continually monitors the primary unit's system health and seamlessly takes control in the event of a failure. Control is automatically returned to the primary unit if required, maintaining transparent system communications and control.