Extron VGA M-M MD/50 50 ft VGA Male-Male Molded Cable 26-238-18
Extron VGA M-M MD/50 50 ft VGA Male-Male Molded Cable 26-238-18
Extron VGA M-M MD/50 VGA Male-to-Male Cable
- • 50' (15.2 m) male-to-male VGA cable on Extron MHRVGA cable
- • Molded 15-pin HD male connectors at both ends
- • Pin 9 +5 VDC and ID bits carried end to end (VESA DDC v3 source)
- • Overall foil shield inside the molded body limits EMI pickup
- • Grounded VGA shell adds ESD protection at both ends
- • Certified by Extron for AVEdge, Cable Cubby and HSA access enclosures
- • Retired Extron part 26-238-18, still sourced and supported by Ampronix
Product discontinued.
Need service or repair? No matter the age, brand, or manufacturer Ampronix can repair it! Free, no charge for initial evaluations!
Couldn't load pickup availability
Details
Details
Extron VGA M-M MD/50 (part number 26-238-18) — a 50' (15.2 m) male-to-male VGA cable built on Extron MHRVGA cable.
Past about forty feet an analogue VGA run stops forgiving cheap cable, and this is the length where the difference shows on screen. Extron's answer is MHRVGA cable with an overall foil shield that continues through injection-molded 15-pin HD connector bodies, plus a shell bonded to ground at both ends. Both terminations are male, so the assembly connects a source straight into a switcher or display input over the whole distance with nothing spliced in between.
Key Capabilities
- Carries computer video and ID bit signals across a 50' (15.2 m) run
- Pin 9 +5 VDC and the ID bits travel end to end when the graphics card meets VESA DDC version 3
- Molded 15-pin HD male connectors at both ends
- VGA shell tied to ground for ESD protection
- Injection-molded body with an overall foil shield for EMI isolation
- Certified by Extron for AVEdge, Cable Cubby and HSA access enclosures
Where It Is Used
Large classrooms and lecture theatres, multipurpose halls with a rack at the back of house, council chambers and courtrooms, and simulation labs where the driving workstation is intentionally separated from the display wall.
Specifications at a Glance
- Cable length: 50' (15.2 m)
- Connectors: 2 male 15-pin HD, molded
- Cable: Extron MHRVGA
- DDC: pin 9 +5 VDC and all ID bits carried through (VESA DDC v3 source required)
- Status: retired by Extron
Also referenced as Extron VGAMMMD50, VGA-M-M-MD-50, part number 2623818.
Specifications
Specifications
Diagram
Diagram
Resources
Resources
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
