Extron TLP Pro 525C, TLP Pro 320C, TLP 350CV and TLE 350 Routing Template (part number 70-694-01) — the aluminum cutting guide that produces a clean, correctly sized table opening for these TouchLink enclosures.

Cutting a touchpanel opening freehand is where a good installation goes wrong. This template clamps to the work surface and gives a hand router a hard aluminum edge to follow, so the aperture comes out square, sized to the enclosure, and repeatable across every position in a room. One template covers four products: the TLP Pro 525C, TLP Pro 320C, TLP 350CV and TLE 350. Extron publishes step-by-step routing instructions in the accompanying Routing Template User Guide.

Key Capabilities

• Single template serves the TLP Pro 525C, TLP Pro 320C, TLP 350CV and TLE 350
• Machined from aluminum, so the guide edge survives repeated router passes
• 13.5 in. L x 15.0 in. W footprint (342.9 x 381 mm)
• Cut window measures 7.66 in. x 6.17 in. (194.7 x 156.6 mm)
• Weighs 4 lbs — heavy enough to stay put while the router runs
• Backed by a 3 year parts and labor warranty

Where It Is Used

On the bench and on site by AV integrators and millworkers preparing conference tables, lecterns, classroom instructor stations and control-room consoles for a flush-mounted TouchLink panel. It is a shop tool rather than a room component, and one unit typically serves an installer across many projects.

Specifications at a Glance

• Template dimensions: 13.5 in. L x 15.0 in. W (342.9 x 381 mm)
• Interior cut dimensions: 7.66 in. x 6.17 in. (194.7 x 156.6 mm)
• Material: aluminum
• Product weight: 4 lbs
• Warranty: 3 years parts and labor

Also referenced as Extron TLPPro525C routing template, TLP-Pro-525C-Routing-Template, part number 7069401.