Extron DVID DL Pro/6 (part number 26-651-06) — a 6 ft (1.8 m) dual link DVI-D cable for desk-height and short in-rack connections.

Six feet is the length most integrators reach for when a source sits one shelf away from its display. Extron builds this run of the DVID DL Pro line on 24 AWG silver-coated tinned copper, the gauge it specifies for every length up to 12 feet, and rates the assembly to DVI 1.0 for resolutions as high as 2560x1600 at 60 Hz. Data throughput reaches 10.2 Gbps and color depth runs to 24 bits.

Key Capabilities

• 6 ft dual link DVI-D assembly carrying up to 10.2 Gbps
• Supports 2560x1600 at 60 Hz and vertical refresh to 60 Hz
• Silver-coated tinned copper conductors at 24 AWG with a tinned copper drain wire
• Gold-plated contacts on both male DVI-D dual link connectors
• 0.45 in (11.5 mm) outer diameter; 4.50 in (114.3 mm) minimum bend radius
• UL CL2 rated; Extron Limited Lifetime Performance warranty

Where It Is Used

Typical placements include imaging workstations and their diagnostic displays, editing bays, control-room operator positions, and any rack where a graphics card feeds a monitor mounted just above or beside it.

Specifications at a Glance

• Length: 6' (1.8 m)
• Maximum resolution: 2560x1600 @ 60 Hz
• Data rate: up to 10.2 Gbps
• Conductor gauge: 24 AWG
• Pair impedance: 100 ohms ±10 ohms

Also referenced as Extron DVIDDLPro/6, DVID-DL-Pro-6, part number 2665106. Extron lists 26-651-06 as a retired part number.