Olympus OEV-262H 26" FHD Surgical Display Monitor
Olympus OEV-262H 26" FHD Surgical Display Monitor
Olympus OEV-262H 26-inch Full HD Surgical Display Monitor
- • Olympus OEV-262H / OEV262H 26" FHD Surgical Display Monitor
- • 1400:1 contrast and 178 degree viewing angle
- • PIP, POP and Clone Out display modes
- • Service, repair, replacement and exchange
- • Part# OEV-262H / OEV262H, Sales and Repair
Need service or repair? No matter the age, brand, or manufacturer Ampronix can repair it! Free, no charge for initial evaluations!
Couldn't load pickup availability
Details
Details
Olympus OEV-262H (OEV262H) 26" FHD Surgical display monitor. Ampronix offers refurbished Olympus OEV-262H units, service and repair, and replacement and exchange. Both the OEV-262H and OEV262H model numbers are supported.
Manufacturer: Olympus, Model: OEV-262H, Part number: OEV-262H (also written OEV262H)
The Olympus OEV-262H is a 26-inch Full HD LCD surgical monitor built specifically to pair with Olympus endoscopy systems. This Olympus OEV-262H is available from Ampronix in Refurbished condition, tested and prepared for OR use, with picture-in-picture and picture-out-picture display modes and multiple input terminals for a wide range of image sources.
Key capabilities
- 26-inch Full HD (1920 x 1080) a-Si TFT active matrix LCD panel, 16:9 aspect ratio
- 1400:1 contrast ratio and 178° horizontal and vertical viewing angle
- PIP, POP, and Clone Out display modes for flexible OR layouts
- 3G/HD/SD-SDI (x2), DVI-I (x2), 4-pin mini-DIN, and D-sub 15-pin inputs for compatibility with Olympus CV-190 and other endoscopy processors
- Eco-friendly low power consumption design in a thin, lightweight chassis
- Ampronix Certified Refurbished with repair, service, and exchange replacement support for the Olympus OEV-262H
Where it is used
The Olympus OEV-262H is used in general endoscopy, upper and lower GI endoscopy, colonoscopy, laparoscopic general surgery, urology, and ENT procedures where an Olympus endoscopy system needs a dedicated Full HD reference display in the OR or endoscopy suite.
Specifications at a glance
- Resolution: 1,920 x 1,080 (Full HD), a-Si TFT active matrix, 1400:1 contrast ratio
- Dimensions (without stand): 626.8 x 395.2 x 79.6 mm; weight approx. 7.8 kg (17.2 lb)
- Power input: AC 100-240 V, 50/60 Hz, 0.96-0.47 A
- Part number OEV-262H / OEV262H
Model: OEV-262H / OEV262H
Related: Surgical Display Monitors.
Frequently asked questions about the Olympus OEV-262H
Is the Olympus OEV-262H surgical display monitor available for sales, service and repair, replacement and exchange?
Yes. Ampronix offers refurbished units of the Olympus OEV-262H, plus service and repair, replacement and exchange, subject to availability. Both the OEV-262H and OEV262H versions are covered. Call Ampronix for current availability and a quote.
Does Ampronix repair the Olympus OEV-262H?
Yes. Ampronix provides service and repair for the OEV-262H (OEV262H) with free evaluation and fast turnaround. Call Ampronix for a repair quote.
Can I exchange or replace my OEV-262H?
Yes. Ampronix offers replacement and exchange options for the OEV-262H. Call Ampronix to confirm availability and pricing.
Where can I buy a Olympus OEV-262H surgical display monitor?
Ampronix sells the Olympus OEV-262H (OEV262H). Call Ampronix for current availability, pricing and lead time.
Is the OEV-262H the same as the OEV262H?
Yes. OEV-262H and OEV262H are two ways of writing the same model number, and Ampronix supplies and services both.
Should I repair or replace my OEV-262H?
Ampronix can quote repair, exchange or replacement for the OEV-262H so you can compare options. Call Ampronix for a free evaluation.
What should I have ready when I request a quote for the OEV-262H?
Have the model number (OEV-262H or OEV262H), the serial number from the unit label if you have one, and whether you need a unit, a repair or an exchange.
What are the key features of the Olympus OEV-262H?
Key points for the Olympus OEV-262H: 26" Full HD 1920x1080, a-Si TFT LCD Panel; 1400:1 Contrast, 178° Viewing Angle; PIP, POP & Clone Out Display Modes; SDI, DVI-I, D-sub Inputs, CV-190 Compatible. Call Ampronix to confirm details for your application.
What Olympus systems is the OEV-262H compatible with?
The Olympus OEV-262H is designed for Olympus endoscopy systems including the CV-190 video processor, using SDI, DVI-I, and D-sub inputs (the SMF-405 cable is required for RGB connection to the CV-190).
Specifications
Specifications
Resources
Resources
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
