Extron XTP DTP 22/75 (part number 26-739-75) — a 75 ft (22.8 m) S/FTP twisted pair cable for Extron XTP Systems and DTP systems.

Seventy-five feet crosses most large rooms end to end. What matters at that distance is that the shielding holds and the terminations are consistent, which is why Extron builds this length in the factory rather than leaving it to a site crimp. The four solid 22 AWG copper pairs each carry an aluminium foil shield, wrapped again by a tinned copper braid; the finished assembly is certified to 500 MHz and cleared for DTP3 uncompressed 4K/60 at 4:4:4 out to 330 ft. Molded strain reliefs protect the sleeve where flexing does the most damage.

Key Capabilities

• Bandwidth certified to 500 MHz for runs up to 330 ft (100 m).
• Delivers uncompressed 4K/60 at 4:4:4 on DTP3 links.
• Four individually shielded 22 AWG pairs inside an overall braid.
• Gold-plated contacts, shielded CAT6A RJ45 male plugs both ends.
• Compatible with DTP3, DTP2, DTP, XTP II and XTP systems.
• Factory terminated to TIA/EIA T568B for repeatable performance.
• Non-plenum, NEC CM-rated gray PVC jacket.

Where It Is Used

Suited to large lecture theatres, multipurpose halls, sports venues and hospital corridors where the head-end and the display are in different rooms but still well short of the 330 ft system ceiling.

Specifications at a Glance

• Length: 75 ft (22.8 m)
• Connector: 1 male shielded CAT6A RJ45 to 1 male shielded CAT6A RJ45
• Bend radius: 3.5 in (89 mm)
• Regulatory: NEC 800, CM UL 1685, RoHS, WEEE
• Warranty: Limited Lifetime Performance

Also referenced as Extron XTPDTP2275, XTP-DTP-22-75, part number 2673975.