Extron XTP DTP 22/6 (part number 26-739-06) — a 6 ft (1.8 m) precision-terminated S/FTP cable engineered for Extron XTP Systems and DTP systems.

Extron builds this length from the same XTP DTP 22 bulk cable used on 300 ft pulls, so a six-foot hop between a switcher and a patch field carries no performance penalty. Four 22 AWG solid copper pairs are individually wrapped in aluminium foil, then bundled inside a tinned copper braid; that double layer is what keeps a 4K/60 4:4:4 stream clean when the cable shares a tray with power and control runs. Both ends leave the factory terminated to TIA/EIA T568B with moulded strain relief.

Key Capabilities

• Bandwidth certified to 500 MHz over runs as long as 330 ft (100 m).
• Supports uncompressed 4K/60 at 4:4:4 on DTP3 links.
• S/FTP design: four shielded twisted pairs within an overall braided shield.
• Shielded CAT6A RJ45 male plugs with gold-plated contacts.
• Works across DTP3, DTP2, DTP, XTP II and XTP infrastructure.
• 0.24 in outer diameter with a 3.5 in minimum bend radius.
• NEC CM-rated non-plenum gray PVC jacket.

Where It Is Used

A six-foot lead suits equipment racks, lectern interiors and AV credenzas — connecting endpoints to wall jacks, chaining couplers, or bridging a transmitter to a floor box in meeting rooms, classrooms and broadcast control areas.

Specifications at a Glance

• Length: 6 ft (1.8 m)
• Conductors: solid bare copper 22 AWG
• Connector dimensions: 0.85 in L x 0.30 in W x 0.46 in thick, excluding tab
• Regulatory: NEC 800, CM UL 1685, RoHS, WEEE
• Warranty: Limited Lifetime Performance

Also referenced as Extron XTPDTP226, XTP-DTP-22-6, part number 2673906.