Extron XTP DTP 22/50 (part number 26-739-50) — a 50 ft (15.2 m) shielded twisted pair cable terminated at the Extron factory for XTP and DTP systems.

Fifty feet is where a single-room job becomes a building job, and it is also the point at which cheap patch cable starts to show up as sparkle or dropout on a 4K feed. This assembly avoids that by using the same XTP DTP 22 bulk stock Extron certifies to 500 MHz across a full 330 ft: four 22 AWG solid copper pairs, each foil-shielded, inside a tinned copper braid, jacketed in gray PVC. Both ends carry Extron's own RJ-45 plugs with molded strain relief, wired to TIA/EIA T568B.

Key Capabilities

• 500 MHz certified bandwidth at distances up to 330 ft (100 m).
• Rated for DTP3 uncompressed 4K/60 video at 4:4:4 chroma sampling.
• Solid bare copper 22 AWG conductors, four pairs, S/FTP shielded.
• Shielded CAT6A RJ45 male connectors with gold-plated contacts.
• Approved for DTP3, DTP2, DTP, XTP II and XTP systems.
• 3.5 in (89 mm) bend radius keeps installs within spec around corners.
• Limited Lifetime Performance warranty.

Where It Is Used

Fifty-foot links commonly connect an equipment room to a neighbouring conference room, feed a distant video wall controller, or run from a stage box to a projection booth in auditoriums, training centres and broadcast facilities.

Specifications at a Glance

• Length: 50 ft (15.2 m)
• Shielding: S/FTP with AL foil per pair plus overall tinned copper braid
• Cable outer diameter: 0.24 in (6.1 mm)
• Termination standard: TIA/EIA T568B
• Cable rating: non-plenum, NEC CM-rated

Also referenced as Extron XTPDTP2250, XTP-DTP-22-50, part number 2673950.