Extron XTP DTP 22/25 (part number 26-739-25) — a 25 ft (7.6 m) precision-terminated shielded twisted pair cable for XTP and DTP infrastructure.

At 25 feet the cable is long enough to leave the equipment room, which is where electrical noise starts to matter. The S/FTP build answers that: every one of the four 22 AWG solid copper pairs gets an aluminium foil shield, and the whole bundle sits inside a tinned copper braid. Extron certifies the design to 500 MHz and rates it for DTP3 uncompressed 4K/60 at 4:4:4 out to a full 330 ft, so a 25 ft segment has substantial headroom in hand.

Key Capabilities

• 500 MHz certified bandwidth on runs reaching 330 ft (100 m).
• Handles uncompressed HDMI 2.0b and DTP3 4K/60 at 4:4:4.
• S/FTP shielding rejects interference from adjacent power and control cable.
• Shielded CAT6A RJ45 male plug at each end with gold-plated contacts.
• Suits DTP3, DTP2, DTP, XTP II and XTP systems alike.
• Factory termination to TIA/EIA T568B with molded strain relief.
• Non-plenum, NEC CM-rated construction.

Where It Is Used

Twenty-five feet typically links a rack to a display wall, a ceiling projector to a nearby receiver, or one room's endpoint to an adjacent equipment closet in boardrooms, auditoriums, courtrooms and clinical viewing areas.

Specifications at a Glance

• Length: 25 ft (7.6 m)
• Conductors: solid bare copper 22 AWG
• Cable outer diameter: 0.24 in (6.1 mm)
• Connector dimensions: 0.85 in L x 0.30 in W x 0.46 in thick, excluding tab
• Warranty: Limited Lifetime Performance

Also referenced as Extron XTPDTP2225, XTP-DTP-22-25, part number 2673925.