Extron XTP DTP 22/125 (part number 26-739-125) — a 125 ft (38.1 m) S/FTP twisted pair cable factory-built for XTP Systems and DTP systems.

Runs of this length usually leave the building's conditioned spaces and travel through risers or above ceilings alongside mains cable. The XTP DTP 22 construction is what makes that survivable: four solid 22 AWG copper pairs, each individually wrapped in aluminium foil, all enclosed in a tinned copper braid. Extron certifies the design to 500 MHz across a full 330 ft and rates it to carry DTP3 uncompressed 4K/60 at 4:4:4, so a 125 ft link still has plenty of margin for couplers and patch points.

Key Capabilities

• 500 MHz bandwidth certification valid to 330 ft (100 m).
• Supports DTP3 uncompressed 4K/60 video at 4:4:4 chroma sampling.
• S/FTP shielding: AL foil per pair plus an overall tinned copper braid.
• Extron XTP DTP 22 RJ-45 plugs with molded strain relief at both ends.
• Gold-plated contacts in shielded CAT6A male connectors.
• Works with DTP3, DTP2, DTP, XTP II and XTP systems.
• Non-plenum, NEC CM-rated gray PVC jacket.

Where It Is Used

Typical for riser runs between floors, long corridor pulls to remote displays, and stadium or convention centre installations where a receiver sits far from the central switching rack but within the DTP3 distance budget.

Specifications at a Glance

• Length: 125 ft (38.1 m)
• Conductors: solid bare copper 22 AWG, four pairs
• Cable outer diameter: 0.24 in (6.1 mm); bend radius 3.5 in (89 mm)
• Termination standard: TIA/EIA T568B
• Warranty: Limited Lifetime Performance

Also referenced as Extron XTPDTP22125, XTP-DTP-22-125, part number 26739125.