Extron UC50' (part number 26-518-01) — a 50 ft (15.2 m) universal projector control cable, terminated with a female 9-pin D connector at the display and left unterminated at the controller end.

Projector control is the part of a room install that quietly eats time: the display wants a 9-pin D serial connection, the controller wants bare conductors landed on captive screws, and the two are usually at opposite ends of a ceiling. This cable is built for exactly that job. One end arrives ready to plug into the display's RS-232 port; the other is prepared for captive screw termination at the controller, so the installer strips and lands rather than soldering a connector at height.

Key Capabilities

• Designed for universal projector control communications with most RS-232 controllable displays.
• Works with Extron IN1808 IPCP presentation switchers and DTP CrossPoint IPCP presentation matrix switchers.
• Also intended for the projector control port on many MediaLink Controllers.
• Display end is terminated with a female 9-pin D connector.
• Controller end is unterminated and captive screw ready.
• 50 ft (15.2 m) reaches from a rack or wall controller to a ceiling-mounted projector.
• Extron part number 26-518-01.

Where It Is Used

Classroom and lecture-hall projector control drops, meeting rooms with ceiling-mounted displays, house-of-worship and auditorium installs, and any MediaLink or IPCP-controlled room where the display's serial port has to reach a controller across the space.

Specifications at a Glance

• Length: 50 ft (15.2 m)
• Display end: female 9-pin D connector
• Controller end: unterminated, captive screw ready
• Application: RS-232 projector and display control
• Extron part number: 26-518-01

Also referenced as Extron UC50, UC-50, part number 2651801.