Extron Retractor Filler Module (part number 70-678-08) — the original filler module for first-generation Retractor installations. Extron has retired this part number; current builds use 70-1065-35.

Extron treats fillers as mandatory rather than cosmetic: any Retractor position left without a cable module has to be occupied so the enclosure stays closed and the mounting hardware still passes through every bay. This is the part that did that job in the earlier 70-678 series Retractor and Retractor XL installations, and it remains useful when an existing enclosure needs a matching component rather than a mixed-generation one.

Key Capabilities

• Occupies an unused Retractor module position in a Cable Cubby enclosure.
• Original generation part, listed by Extron alongside the 70-678 and 70-1001 Retractor families.
• Installs on the same mounting hardware as the Retractor modules it sits beside.
• Keeps the enclosure face closed where no cable module is fitted.
• Retired by Extron; the current equivalent is the Retractor Filler Module 70-1065-35.

Where It Is Used

Legacy Cable Cubby installations built on the original Retractor and Retractor XL modules, particularly in boardrooms, classrooms and courtrooms that have been in service for years and are being repaired rather than replaced. Specify 70-1065-35 for anything new.

Specifications at a Glance

• Function: filler module for unused Retractor positions
• Extron lifecycle status: retired
• Current replacement: Retractor Filler Module, part 70-1065-35
• Listed as an accessory for the original Retractor and Retractor XL families

Extron does not publish a separate specification sheet for this accessory, so no dimensions or weight are claimed here. Contact Ampronix if you need those confirmed for a particular enclosure.

Also referenced as Extron RetractorFillerModule, Retractor-Filler-Module, part number 7067808.