Extron HDMI Pro/100 (part number 26-650-100) is a 100 ft (30.4 m) HDMI cable that Extron places in its Standard HDMI class.

At 30.4 m the run sits well past every resolution figure Extron publishes for the series, and the company labelling reflects that: this is a Standard HDMI part, not a 4K one. The guidance Extron does give is to add a cable equalizer for 1080p at 60 Hz on runs longer than 75 ft. Ampronix carries 26-650-100 for like-for-like replacement of an existing long pull and for signage and monitoring links where distance matters more than pixel count.

Key Capabilities

• Extron labels 26-650-100 a Standard HDMI part rather than a 4K part.
• 22 AWG tinned copper conductors and drain wire.
• Aluminum/Mylar foil with a tinned copper braid under a PVC jacket.
• Cable outer diameter of 0.47 in (12.0 mm), bend radius 4.50 in (114.3 mm).
• Pair impedance of 100 ohms plus or minus 10 ohms.
• Jacket UL Listed as type CM with a CSA FT-1 flame rating.

Where It Is Used

A hundred feet is riser and long-conduit territory: an equipment room on one floor feeding a display on another, a stadium camera position reaching a production rack, a corporate lobby wall driven from a distant closet, or a plant control room monitoring a remote operations screen.

Specifications at a Glance

• Cable length: 100 ft (30.4 m)
• Signal type: HDMI 2.0
• Contacts: gold plated
• Temperature rating: -25 C minimum, 75 C maximum
• Regulatory: UL Listed as type CM, CSA FT-1

Also referenced as Extron HDMIPro/100, HDMI-Pro-100, part number 26650100. Extron lists 26-650-100 as a retired part number.