Extron DVID SL Pro/50 (part number 26-649-50) is a 50 ft (15.2 m) single link DVI-D cable for long rack-to-display runs inside a single space.

At fifty feet the cable itself is the variable that decides whether a DVI-D link locks or sparkles. Extron builds this length with 22 AWG tinned copper conductors, a tinned copper drain wire and a PVC jacket 0.47 in in diameter, and specifies attenuation of 8.2 dB or less per 10 m at 825 MHz against the DVI 1.0 standard. Installers should plan pathways around the 4.50 in bend radius rather than forcing tight corners, since a crushed jacket is the usual cause of intermittent digital video.

Key Capabilities

• 50 ft single link DVI-D run supporting 1920x1200 at 60 Hz.
• Data rate up to 4.95 Gbps on the single link TMDS pairs.
• 22 AWG tinned copper conductors with a 0.47 in outer diameter.
• 4.50 in (114.3 mm) bend radius for planned cable pathways.
• Intrapair skew of 350 ps or less per 12 m.
• 30 V rating, UL Listed as type CM.

Where It Is Used

Fifty foot DVI-D links show up in auditoriums, large boardrooms, broadcast studios, command centers and hospital procedure rooms, typically running from a rack to a ceiling projector or a wall-mounted large-format display. Ampronix supports integrators specifying Extron cable for these permanent installations.

Specifications at a Glance

• Length: 50 ft (15.2 m)
• Maximum resolution: 1920x1200 @ 60 Hz
• Cable outer diameter: 0.47 in (12.0 mm)
• Connector type: 1 male DVI-D single link to 1 male DVI-D single link
• Operating temperature: -25 C to 75 C

Also referenced as Extron DVIDSLPro/50, DVID-SL-Pro-50, part number 2664950. Extron lists 26-649-50 as a retired part number.