Extron DVID SL Pro/12 (part number 26-649-12) is a 12 ft (3.6 m) single link DVI-D cable and the longest length Extron builds using the slim 24 AWG construction.

Twelve feet covers the reach from a rack to a nearby credenza, wall plate or ceiling-mounted projector without stepping up to the heavier 22 AWG cable used on the 25 ft and longer parts. That matters in tight pathways: the jacket measures 0.30 in across and the cable turns a 4.20 in radius, so it routes through cable management that will not accept a thicker DVI assembly. Electrically it is the same design as the rest of the family, with 100 ohm pairs and gold plated contacts on both male DVI-D single link plugs.

Key Capabilities

• Passes up to 4.95 Gbps of single link DVI-D data, per DVI 1.0.
• Rated for a maximum resolution of 1920x1200 at 60 Hz.
• Interpair skew of 2.42 ns or less per 10 m holds the color channels together.
• 24 AWG silver coated tinned copper conductors with a tinned copper drain wire.
• Thin 0.30 in jacket routes where 25 ft and longer DVID SL Pro cable will not.
• 30 V rating and a -25 C to 75 C operating range.

Where It Is Used

Twelve foot DVI-D runs typically connect a rack-mounted source or switcher to a display, projector or wall plate in the same room. Ampronix supplies this length for diagnostic imaging workstations, surgical video carts, classroom projection, digital signage headends and 24/7 control room consoles.

Specifications at a Glance

• Length: 12 ft (3.6 m)
• Maximum resolution: 1920x1200 @ 60 Hz
• Connector type: 1 male DVI-D single link to 1 male DVI-D single link
• Cable: 24 AWG, 0.30 in outer diameter, PVC jacket
• Safety: cable UL Listed as type CM

Also referenced as Extron DVIDSLPro/12, DVID-SL-Pro-12, part number 2664912. Extron lists 26-649-12 as a retired part number.