Extron DVID DL Pro/3 (part number 26-651-03) — a 3 ft (90 cm) dual link DVI-D interconnect for high-resolution desktop and rack-adjacent runs.

Dual link DVI carries twice the TMDS payload of a single link connection, and this Extron assembly is built to keep that payload clean from plug to plug. Extron rates the DVID DL Pro family for 2560x1600 at 60 Hz, with throughput reaching 10.2 Gbps and 24-bit color, so a workstation driving a large-format panel never has to fall back to a reduced timing. Both ends terminate in male DVI-D dual link plugs with gold-plated contacts.

Key Capabilities

• Dual link DVI-D throughput to 10.2 Gbps, enough headroom for 2560x1600 at 60 Hz
• 24-bit color depth — 8 bits per color — at refresh rates to 60 Hz
• 24 AWG silver-coated tinned copper conductors inside a PVC jacket
• 0.45 in (11.5 mm) cable diameter bending to a 4.50 in (114.3 mm) radius
• Pair impedance held to 100 ohms ±10 ohms; attenuation under 8 dB per 10 m at 0.825 GHz
• UL CL2 rated and covered by Extron Limited Lifetime Performance warranty

Where It Is Used

Short dual link runs like this one sit between a workstation and a display a few feet away: radiology reading stations, CAD and GIS desks, broadcast quality-control monitors, and equipment racks where source and sink share the same bay.

Specifications at a Glance

• Length: 3' (90 cm)
• Maximum resolution: 2560x1600 @ 60 Hz
• Connector: 1 male DVI-D dual link to 1 male DVI-D dual link
• Conductor gauge: 24 AWG
• Standard: DVI 1.0

Also referenced as Extron DVIDDLPro/3, DVID-DL-Pro-3, part number 2665103. Extron lists 26-651-03 as a retired part number.