Extron DVID DL Pro/150 (part number 26-651-150) — a 150 ft (45.7 m) dual link DVI-D cable assembly with male DVI-D dual link connectors at both ends. Extron has retired this part number.

One hundred and fifty feet of dual link DVI-D in a single factory-terminated piece is a specialist item, and it is built like one. The conductors and drain wire are 22 AWG tinned copper, the jacket is PVC at 0.55 in across, and the assembly turns a 5.50 in corner — numbers worth checking against the conduit before the pull, because this is not a cable that will fold into a shallow wall box. Electrically it is DVI 1.0 with a 10.2 Gbps ceiling, 100 ohms ±10 ohms pair impedance, and gold-plated contacts at both ends.

Key Capabilities

• 150 ft (45.7 m) single-piece dual link DVI-D assembly.
• 22 AWG tinned copper conductors and drain wire under a PVC jacket.
• DVI 1.0 with data rates to 10.2 Gbps and vertical frequency to 60 Hz.
• 0.55 in (14.0 mm) outer diameter with a 5.50 in (140.0 mm) bend radius.
• Intrapair skew ≤350 ps and interpair skew ≤2.4 ns per 12 m.
• Gold-plated contacts on both DVI-D dual link connectors; NEC CL2 rated.
• Retired Extron part number — useful for matching an existing installed system.

Where It Is Used

Building-scale DVI runs in legacy infrastructure: theatre and auditorium projection, transport and utility control centres, planetarium and simulator domes, and large medical or research facilities where a dual link DVI source has to reach a display on another part of the floor.

Specifications at a Glance

• Length: 150 ft (45.7 m), measured tip to tip including connectors
• Series maximum resolution: 2560 x 1600 at 60 Hz; Extron states 25 ft and longer cables support 2560 x 1600 at 60 Hz and 1080p/60 up to 75 ft
• Attenuation: less than 8 dB per 10 m at 0.825 GHz
• Voltage 30 V; temperature rating -25 °C to 75 °C; limited lifetime performance warranty

Also referenced as Extron DVIDDLPro150, DVID-DL-Pro-150, part number 26651150.