Extron CAT 6 Jack - Red (part number 100-477-01) — ten red RJ-45 keystone jacks supplied as a single pack for Category 6 work.

Colour is how a cable plant stays readable a decade after the installer leaves. Where a site reserves red for a particular class of circuit, the jack at the faceplate has to match the label on the patch panel and the jacket on the cable. That is the job this pack does: ten red keystone jacks, each one accepting Category 6 twisted pair and closing the connection without a punch-down tool being brought to the opening.

Key Capabilities

• Red keystone housing for zone or circuit-class identification
• Accepts Category 6 twisted pair cable
• Termination is completed with no punch-down tool
• Follows TIA/EIA 568 A wiring
• Carries UL approval
• Ten jacks per pack, ordered as 100-477-01

Where It Is Used

Red outlets commonly flag the runs an operator must not touch casually — a dedicated control network in a broadcast suite, an isolated segment feeding a command centre wall, or a reserved drop at a nurse station. The colour carries the warning without a printed label.

Specifications at a Glance

• Connector: RJ-45 keystone jack
• Cable category: Category 6
• Termination: punch-down tool not required
• Standards: TIA/EIA 568 A, UL approved
• Colour and count: red, 10 per pack

Also referenced as Extron CAT6JackRed, CAT-6-Jack-Red, part number 10047701.

Extron lists its assorted-colour CAT 6 Jacks range as retired, so this is a legacy part number.