{"product_id":"extron-ebdb-60-1170-01","title":"Extron EBDB eBUS Distribution Hub with 10 eBUS Ports 60-1170-01","description":"\u003cp\u003e\u003cstrong\u003eExtron EBDB\u003c\/strong\u003e (part number 60-1170-01) — an eBUS signal distribution hub with ten parallel ports for eBUS-enabled IP Link Pro control processors.\u003c\/p\u003e\n\u003cp\u003eWiring every button panel back to the processor produces a rack full of home runs. The EBDB replaces that with a single hub: its ten ports are wired in parallel, so each one acts as an input or an output for traffic between an IPCP Pro processor and the eBUS endpoints. Practically, that means one IPCP Pro plus nine endpoints, or ten endpoints on their own. A front-panel LED reports whether power is present on any port. One caution Extron stresses in the setup guide: only one source should feed the +V pins, so never connect the power pin to a device already powered elsewhere.\u003c\/p\u003e\n\u003ch3\u003eKey Capabilities\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTen 4-pole 3.5 mm captive screw eBUS ports, all connected in parallel.\u003c\/li\u003e\n\u003cli\u003eEach port works as an input or an output for eBUS communication.\u003c\/li\u003e\n\u003cli\u003eConnects up to ten eBUS devices in daisy-chain or star topology.\u003c\/li\u003e\n\u003cli\u003eFront-panel power LED: unlit means no power, lit means power present.\u003c\/li\u003e\n\u003cli\u003eNo configuration required on the hub itself.\u003c\/li\u003e\n\u003cli\u003eZipClip 200 mounting clip included for desk, rack rail or furniture mounting.\u003c\/li\u003e\n\u003cli\u003eQuarter-rack width lets four units share one rack shelf.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere It Is Used\u003c\/h3\u003e\n\u003cp\u003eSits in racks, under desks, on lectern shelves or strapped to a projector pole in classrooms, boardrooms and multi-room installations where several eBUS button panels and endpoints must reach one control processor without individual cable runs.\u003c\/p\u003e\n\u003ch3\u003eSpecifications at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eeBUS pin configuration: +V = +12 VDC, +S = + signal, -S = - signal, G = ground\u003c\/li\u003e\n\u003cli\u003eMaximum system cable length: 1000 ft (305 m) total, any topology\u003c\/li\u003e\n\u003cli\u003eEnclosure: high impact, high temperature plastic, 1.7 in H x 4.3 in W x 4.5 in D\u003c\/li\u003e\n\u003cli\u003eProduct weight: 0.8 lb (0.4 kg); shipping weight 3 lbs (2 kg)\u003c\/li\u003e\n\u003cli\u003eRecommended cable: Extron STP20-2\/1000 or STP20-2P\/1000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"alt-refs\"\u003eAlso referenced as Extron EBDB, EBDB hub, part number 60117001.\u003c\/p\u003e","brand":"Extron","offers":[{"title":"Default Title","offer_id":52304745496796,"sku":"EXTRON-EBDB-60117001","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/5582\/4092\/files\/extron-ebdb-60-1170-01.jpg?v=1787243959","url":"https:\/\/www.ampronix.com\/products\/extron-ebdb-60-1170-01","provider":"Ampronix","version":"1.0","type":"link"}