2MP Grayscale Eizo RadiForce GX220-BK Diagnostic (Refurbished)

2MP Grayscale Eizo RadiForce GX220-BK Diagnostic (Refurbished)

Availability: In stock

Quick Overview

Eizo RadiForce GX220BK (GX220-BK) 2MP 54cm (21.3") Medical Diagnostic Monochrome LCD Monitor

  • This product has been replaced by Eizo RadiForce GX240
  • 2 MP 21.3" Medical Diagnostic Monochrome LCD Monitor
  • Built-in Swing Sensor
  • 10-Bit Simultaneous Grayscale Display
  • DUE for Brightness Uniformity
  • Calibration Mode Selection
  • Independent Image Setting
  • Backlight Saver


Eizo RadiForce GX220BK (GX220-BK) 2MP 54cm (21.3") Medical Diagnostic Monochrome LCD Monitor

The Eizo RadiForce GX220 is ideal for a wide variety of tasks from viewing of ultrasound, endoscope, CT and MRI images to use as a PACS/HIS/RIS terminal. A built-in swing sensor conveniently appears only when remote quality control operations such as calibration are being performed.

CAL switch function offers calibration modes that can be selected for any specific image such as CR and CT from a front panel button.

Compatible with EIZO's remote calibration device "Clip-On Swing Sensor G1" using EIZO's quality control software RadiCS and RadiNET Pro (Compatible with RadiCS andRadiNET Pro version 2.3.0 and later).

With the bundled ScreenManager Pro for Medical software, the Independent Image Setting (IIS) function allows for any specific area of an image to be adjusted and pre-set to various grayscale gradations and luminance levels.

The Digital Uniformity Equalizer (DUE) function provides optimum backlight luminance uniformity which is considered difficult to attain due to the characteristics of LCD monitors.


Additional Information

Screen Technology/Type Monochrome TFT LCD Panel (IPS)
Screen Size (diagonal) 54 cm / 21.3 Inches
Display Resolution 1200 x 1600
Pixel Pitch 0.270 x 0.270 mm
Viewing Angle (H, V) 170° / 170°
Maximum Luminance 1,000 cd/m²
Calibrated Luminance  
Contrast Ratio 850:1
Response Time 23 ms (On/Off)
Video Input Connectors DVI-D 24 pin
Power Input Requirements AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
Power Consumption 100 W
Power Save Mode Less than 3 W
Dimensions with Stand (W x H x D)  
Dimensions without Stand (W x H x D)  
Net Weight with Stand 10.8 kg
Net Weight without Stand 7.8 kg
Mounting Options VESA Standard 100 x 100 mm
Certifications CE (Medical Device Directive), EN60601-1, UL60601-1, CSA C22.2 No. 601-1, IEC60601-1, VCCI-B, FCC-B, Canadian ICES-003-B, C-tick, FDA 510(k) *, RoHS
Supplied Accessories AC power cord, user's manual, signal cable (DVI-D ~ DVI-D), USB cable, EIZO LCD Utility Disk (RadiCS LE, ScreenManager Pro for Medical), ScreenCleaner, warranty card
Warranty 1 Year
Product Spec Sheet